PETROSCRAP.COM

Teflon PTFE Monofilament, White, 0.094″ Diameter, 50′ Length (Pack of…. Click Here to Read More

Fluorosint 500 PTFE Round Rod, White, 1″ OD, 6″ Length Low Deformation Under LoadLow Coefficient of FrictionExcellent Dimensional StabilityFDA and USDA CompliantChemically Inert Fluorosint 500s unique properties are the result of a proprietary process in which synthetically manufactured mica is chemically linked to PTFE. This bonding results in properties not normally attainable in reinforced PTFE. It has a continuous use temperature to 500 F. When compared to PTFE it has a higher load carrying capability, and lower coefficient of thermal expansion. Fluorosint 500 is a structural/seal grade filled with enough mica to produce a thermal expansion 15percent less than unfilled…. Click Here to Read More

PTFE Sheet, White, 0.375″ Thick, 6″ Width, 12″ Length Sheet FormMax Temp 500 FVery Low Coefficient of FrictionExtremely Low Dielectric ConstantUV and Ozone Resistant PTFE sheet (Polytetrafluoroethylene) sometimes known as Teflon has established itself as a tough, durable polymer, possessing a unique combination of electrical, chemical, mechanical and thermal properties unmatched by any other single substance. Maximum operating temperature -350 degrees to 500 degrees F. This material should not be heated to temperatures above 752 degrees F (400 degrees C). PTFE Sheet is available in a series of nine thicknesses from 0.005 inches to 0.500 inches. In addition, three of these thicknesses…. Click Here to Read More

PTFE Round Rod, White, 1-1/2″ OD, 6″ Length Rod FormMax Temp 400 FVery Low Coefficient of FrictionExtremely Low Dielectric ConstantUV and Ozone Resistant PTFE (Polytetrafluoroethylene Teflon) has established itself as a tough, durable polymer, possessing a unique combination of electrical, chemical, mechanical and thermal properties unmatched by any other single substance. Maximum operating temperature 350 to 400F (176 to 204C). This material should not be heated to temperatures above 752F (400C). List Price: $ 17.41 Price: $…. Click Here to Read More

Porous PTFE Sheet, Hydrophobic Treatment, White, 1/16″ Thick, 4-3/8″ Width, 4-3/8″ Length Resists concentrated acids, alkali’s, and numerous organic solvents.Rods allow for flexibility in fabrication.Open Cell Porous StructureSurface and Depth FiltrationVenting, Wicking, Foaming, Sparging, Aeration25µ Pore Size These porous polypropylene tubes are highly resilient, lightweight, and resistant to a broad spectrum of chemicals and reagents. The omni-directional, inter-connecting, open-celled pore structure of Porous Plastics can perform as a surface or depth filter; provide wicking of solutions by capillary action; venting or diffusing by controlled flow of gases; or act as a sterile…. Click Here to Read More

PTFE Sheet, White, 0.06″ Thick, 6″ Width, 6″ Length Sheet FormMax Temp 500 FVery Low Coefficient of FrictionExtremely Low Dielectric ConstantUV and Ozone Resistant PTFE sheet (Polytetrafluoroethylene) sometimes known as Teflon has established itself as a tough, durable polymer, possessing a unique combination of electrical, chemical, mechanical and thermal properties unmatched by any other single substance. Maximum operating temperature -350 degrees to 500 degrees F. This material should not be heated to temperatures above 752 degrees F (400 degrees C). PTFE Sheet is available in a series of nine thicknesses from 0.005 inches to 0.500 inches. In addition, three of these thicknesses…. Click Here to Read More

PTFE Round Rod, White, 5/16″ OD, 12″ Length Rod FormMax Temp 400 FVery Low Coefficient of FrictionExtremely Low Dielectric ConstantUV and Ozone Resistant PTFE (Polytetrafluoroethylene Teflon) has established itself as a tough, durable polymer, possessing a unique combination of electrical, chemical, mechanical and thermal properties unmatched by any other single substance. Maximum operating temperature 350 to 400F (176 to 204C). This material should not be heated to temperatures above 752F (400C). List Price: $ 7.72 Price: $…. Click Here to Read More

PTFE Round Rod, White, 5/16″ OD, 12″ Length Rod FormMax Temp 400 FVery Low Coefficient of FrictionExtremely Low Dielectric ConstantUV and Ozone Resistant PTFE (Polytetrafluoroethylene Teflon) has established itself as a tough, durable polymer, possessing a unique combination of electrical, chemical, mechanical and thermal properties unmatched by any other single substance. Maximum operating temperature 350 to 400F (176 to 204C). This material should not be heated to temperatures above 752F (400C). List Price: $ 7.72 Price: $…. Click Here to Read More

PTFE Round Rod, White, 3/8″ OD, 36″ Length Rod FormMax Temp 400 FVery Low Coefficient of FrictionExtremely Low Dielectric ConstantUV and Ozone Resistant PTFE (Polytetrafluoroethylene Teflon) has established itself as a tough, durable polymer, possessing a unique combination of electrical, chemical, mechanical and thermal properties unmatched by any other single substance. Maximum operating temperature 350 to 400F (176 to 204C). This material should not be heated to temperatures above 752F (400C). List Price: $ 11.19 Price: $…. Click Here to Read More

PTFE Sheet, Bondable (Etched), White, 0.015″ Thick, 6″ Width, 6″ Length Bondable Sheet FormMax Temp 500 FVery Low Coefficient of FrictionExtremely Low Dielectric ConstantUV and Ozone Resistant Bondable PTFE sheet is etched on one side. (Polytetrafluoroethylene) Sometimes known as Teflon, it has established itself as a tough, durable polymer, possessing a unique combination of electrical, chemical, mechanical and thermal properties unmatched by any other single substance. Maximum operating temperature -350 degrees to 500 degrees F . This material should not be heated to temperatures above 752 degrees F (400 degrees C). Thicknesses (0.015 inches, 0.030 inches and 0.060 inches) are…. Click Here to Read More

Fluorosint 500 PTFE Sheet, White, 1/2″ Thick, 3″ Width, 3″ Length Low Deformation Under LoadLow Coefficient of FrictionExcellent Dimensional StabilityFDA and USDA CompliantChemically Inert Fluorosint 500s unique properties are the result of a proprietary process in which synthetically manufactured mica is chemically linked to PTFE. This bonding results in properties not normally attainable in reinforced PTFE. It has a continuous use temperature to 500 F. When compared to PTFE it has a higher load carrying capability, and lower coefficient of thermal expansion. Fluorosint 500 is a structural/seal grade filled with enough mica to produce a thermal expansion 15percent less than unfilled…. Click Here to Read More

PTFE Round Rod, White, 3/4″ OD, 12″ Length Rod FormMax Temp 400 FVery Low Coefficient of FrictionExtremely Low Dielectric ConstantUV and Ozone Resistant PTFE (Polytetrafluoroethylene Teflon) has established itself as a tough, durable polymer, possessing a unique combination of electrical, chemical, mechanical and thermal properties unmatched by any other single substance. Maximum operating temperature 350 to 400F (176 to 204C). This material should not be heated to temperatures above 752F (400C). List Price: $ 11.49 Price: $…. Click Here to Read More