PETROSCRAP.COM

Polypropylene Mesh Roll, 105 Micron Square Opening, 24.8% Open Area, 100 Micron Thread Diameter, 45″ Wide, 2.5 Yard Length Low Specific GravityHighly Resistant To ChemicalsMelting Temperature 320 FMesh Opening Size 105 MicronsScreen Floats In Water Polypropylene screen cloth offers great strength and stability, polypropylene has the lowest specific gravity (0.91) of any synthetic. Highly resistant to acids and alkalis as well as other chemicals. Polypropylene Screen Cloth has a melting temperature of 320 to 340F (160 to 171C). List Price: $ 86.35 Price: $…. Click Here to Read More

HDPE (High Density Polyethylene) Round Rod, White, 1/2″ OD, 48″ Length Abrasion ResistantLow coefficient of FrictionGood Energy AbsorptionResists Stress CrackingModerate Temperature Rating High Density Polyethylene (HDPE) is high impact strength with a higher temperature rating than Low Density Polyethylene. It has higher tensile strength, good energy absorption, abrasion resistance and resists stress cracking. HDPE has a low coefficient of friction and is self lubricating. Applications include low speed bearings, tank/chute/bin linings, packing rings in chemical applications. HDPE is in the family of polyolefin’s. List Price: $ 10.23 Price: $…. Click Here to Read More

HDPE (High Density Polyethylene) Sheet, Beige, 0.09″ Thick, 12″ Width, 24″ Length Abrasion ResistantLow coefficient of FrictionGood Energy AbsorptionResists Stress CrackingModerate Temperature Rating High Density Polyethylene (HDPE) is high impact strength with a higher temperature rating than Low Density Polyethylene. It has higher tensile strength, good energy absorption, abrasion resistance and resists stress cracking. HDPE has a low coefficient of friction and is self lubricating. Applications include low speed bearings, tank/chute/bin linings, packing rings in chemical applications. HDPE is in the family of polyolefin’s. List Price: $ 10.81 Price: $…. Click Here to Read More

Polyester Mesh Roll, White, 420 Microns Square Opening, 39% Open Area, 250 Microns Thread Diameter, 52″ Width, 2.5 Yards Length Gamma SteriizableGood Solvent ResistanceGood UV ResistanceMesh Opening Size 420 MicronsPrecise Opening Size Polyester Screen cloth: Unaffected by most solvents, Polyester PETP (Polyester, Polyethylene Terephthalate) has good resistance to strong acids at room temperature and resists weak acids and alkalies even at high temperatures; strong alkalies can weaken it. UV resistance is good, but it tends toward a slight loss of tensile strength with prolonged exposure to sunlight. Lacks good hydrolysis resistance, but retention of properties after gamma radiation…. Click Here to Read More

CPVC Round Rod, Gray, 1/4″ OD, 48″ Length Good Tensile Strength and Impact StrengthTemperature Range 32 – 200FExcellent Chemical ResistanceLow Flame and Smoke GenerationHigher Temperature Rating than PVC CPVC (Chlorinated) Rod has higher heat resistance and better corrosion resistance than PVC. Its outstanding dielectric, flame and smoke properties provide parts with low flame spread and and smoke generation characteristics. Used extensively in chemical processing plants. Temperature range is 32 – 200 F List Price: $ 10.58 Price: $…. Click Here to Read More

Ertalyte PET Sheet, White, 3/8″ Thick, 6″ Width, 6″ Length Low Water AbsorptionExcellent Wear ResistanceVery Low PorosityHigh Flexural ModulusGood Impact Resistance PET (Polyethylene Terephthalate) is an unreinforced, semi-crystalline thermoplastic Polyester. It has excellent wear resistance, essentially no porosity and low absorption. Low coefficent of friction, high flexural modulus and superior dimensional stability make it a versatile material for designing mechanical and electromechanical parts. Applications include food and beverage handling, printing inks, and water purification products. List Price: $ 17.66 Price: $…. Click Here to Read More

Acrylic Sheet, Clear, 3/16″ Thick, 12″ Width, 12″ Length Abrasion ResistantHaze Free LongevityShatter and Impact ResistantLightweightAmmonia and Detergent Resistant Acrylite is more abrasion resistant than uncoated acrylics, Acrylite A-R Super Abraision Resistant Sheet remains haze-free even after years of service. Shatter and impact resistant, Acrylite is only half the weight of glass in comparable thickness. A good option for designs requiring lightweight, less expensive support structures, this coated acrylic is unaffected by most non-abrasive cleaners, including ammonia and strong detergents. List Price: $ 15.49 Price: $…. Click Here to Read More

Rulon J Round Rod, Gold, 1/4″ OD, 6″ Length Low Coefficient of FrictionUse for bearing surface on soft metalsLow moisture absorption, and excellent hydrolysis resistanceGood choice for inaccessible bearing surfacesNo lubrication required Rulon-J Rod is made from an all-polymeric, PTFE compound that offers low coefficient of friction (0.05 to 0.20 depending upon temperature and load), and a hardness of 60 on Shore D Scale with 0 percent water absorption. The material was expressly developed to run against soft materials such as Brass, Type 316 Stainless Steel, Aluminum, Zinc and plastics, and other materials which are worn rapidly by existing filled PTFE compounds. Check chemical…. Click Here to Read More

Vivak PETG Sheet, Clear, 0.236″ Thick, 24″ Width, 24″ Length Cold bends without hazing or crackingCrystal ClearCan be punched, die cut, laser cut, welded, riveted, and bondedCan be screen printed, painted, and hot stampedGood Chemical Resistance PETG, or Polyethleneterephtalate Glycol Polyester is crystal clear with outstanding formability and no need to pre dry. This material cold bends without hazing or cracking and will not turn white when formed or bent. PETG is tough, durable and impact resistant, allowing downgauging. PETG resists chiping and cracking and can be safely sawed, drilled, punched, die cut, laser cut, welded, riveted or bonded. It also routes and edge polishes…. Click Here to Read More

HDPE (High Density Polyethylene) Sheet, White, 0.25″ Thick, 12″ Width, 12″ Length Abrasion ResistantLow coefficient of FrictionGood Energy AbsorptionResists Stress CrackingModerate Temperature Rating High Density Polyethylene (HDPE) is high impact strength with a higher temperature rating than Low Density Polyethylene. It has higher tensile strength, good energy absorption, abrasion resistance and resists stress cracking. HDPE has a low coefficient of friction and is self lubricating. Applications include low speed bearings, tank/chute/bin linings, packing rings in chemical applications. HDPE is in the family of polyolefin’s. List Price: $ 7.17 Price: $…. Click Here to Read More

Polypropylene Mesh Roll, 149 Micron Square Opening, 34.2% Open Area, 106 Micron Thread Diameter, 55″ Wide, 5 Yard Length Low Specific GravityHighly Resistant To ChemicalsMelting Temperature 320 FMesh Opening Size 149 MicronsScreen Floats In Water Polypropylene screen cloth offers great strength and stability, polypropylene has the lowest specific gravity (0.91) of any synthetic. Highly resistant to acids and alkalis as well as other chemicals. Polypropylene Screen Cloth has a melting temperature of 320 to 340F (160 to 171C). List Price: $ 149.31 Price: $…. Click Here to Read More

Acetal Round Rod, Black, 5/16″ OD, 24″ Length Excellent machinabilityExcellent Dimensional StabilityTough and Impact ResistantLow Coefficient of FrictionModerate Chemical Resistance Commonly referred to as Delrin, this Acetal is a useful replacement for metal in many applications such as gears, pulleys, impellers, etc. Easily machined with all standard machine tools. Its machinability is equal to or better than free machining brass in the normal operations of milling and turning to threading and tapping. This Acetal Resin offers a high degree of dimensional stability, toughness, impact strength, low coefficient of friction and fair chemical resistance.Note: Delrin may cause allergic…. Click Here to Read More