PETROSCRAP.COM

Teflon PTFE Monofilament, White, 0.094″ Diameter, 50′ Length (Pack of…. Click Here to Read More

Polycarbonate Sheet, ASTM D 3935, Clear, 0.093″ Thick, 12″ Width, 24″ Length High Impact ResistanceTemperature Range of -60 to 270 FHigh RigidityDuctility of Softer Lower Modulus PlasticsTransparent Clear Commonly referred to as Lexan, Polycarbonate is a thermoplastic used in many applications that require high impact strength, a large temperature service range, excellent electrical properties, and dimensional stability. Polycarbonate Sheet is smooth and clear. Normal forming temperature of Polycarbonate is 375F (190C). List Price: $ 13.91 Price: $…. Click Here to Read More

Polycarbonate Round Rod, Clear, 5/16″ OD, 36″ Length High Impact ResistanceTemperature Range of -60 to 270 FHigh RigidityDuctility of Softer Lower Modulus PlasticsTransparent Clear Commonly referred to as Lexan, Polycarbonate is a thermoplastic used in many applications that require high impact strength, a large temperature service range, excellent electrical properties, and dimensional stability. Polycarbonate Sheet is smooth and clear. Normal forming temperature of Polycarbonate is 375F (190C). List Price: $ 13.04 Price: $…. Click Here to Read More

PPS Sheet, Rockwell R126, Opaque White, 2″ Thick, 6″ Wide, 6″ Length Chemical ResistanceZero Moisture AbsorptionMachines to tight tolerancescontinuous service to 425°F (220°C)Low frictionPoor impact strength PPS products offer dimensional stability and strength at moderate temperatures List Price: $ 778.02 Price: $…. Click Here to Read More

HDPE (High Density Polyethylene) Round Rod, White, 1″ OD, 60″ Length Abrasion ResistantLow coefficient of FrictionGood Energy AbsorptionResists Stress CrackingModerate Temperature Rating High Density Polyethylene (HDPE) is high impact strength with a higher temperature rating than Low Density Polyethylene. It has higher tensile strength, good energy absorption, abrasion resistance and resists stress cracking. HDPE has a low coefficient of friction and is self lubricating. Applications include low speed bearings, tank/chute/bin linings, packing rings in chemical applications. HDPE is in the family of polyolefin’s. List Price: $ 34.24 Price: $…. Click Here to Read More

ABS Sheet, Natural Beige, 1″ Thick, 12″ Width, 12″ Length Good Chemical ResistanceHard SurfaceEasily MachinedGood for Vacuum FormingGood Impact Resistance General purpose grade ABS combines heat stability, chemical resistance and surface hardness of Acrylonitrile with the toughness and impact resistance of Butadiene and the rigidity and machineability of Styrene…to give you ABS with easy formability and high gloss. Good for vacuum forming, with a normal forming temperature at 295 degrees F (146 degrees C) – Rockwell Hardness R-105. Color: Natural (Beige) List Price: $ 44.93 Price: $…. Click Here to Read More

PPS Sheet, Rockwell R126, Opaque White, 3/8″ Thick, 6″ Wide, 6″ Length Chemical ResistanceZero Moisture AbsorptionMachines to tight tolerancescontinuous service to 425°F (220°C)Low frictionPoor impact strength PPS products offer dimensional stability and strength at moderate temperatures List Price: $ 148.53 Price: $…. Click Here to Read More

Nylon Molybdenum Round Rod, 5/16″ OD, 24″ Length Molybdenum disulfide creates a superior bearing and bushingResists Common Solvents, Esters, Ketones, Alkali’s and Dilute AcidNo lubrication required7.5 to 8.5 percent water absorptionGood choice for inaccessible bearing surfaces This excellent combination of wearing resistant qualities of virgin Nylon 6/6 with the antifriction capability of molybdenum disulfide creates a superior bearing and bushing material. Useful wherever lubrication is undesirable, when the part is located in a position that is difficult to service. Nylon Molybdenum disulfide resists common solvents, hydrocarbons, esters, ketones, alkalies and dilute acids. Not…. Click Here to Read More

Nylon Mesh Sheet, White, 170 Microns Square Opening, 54% Open Area, 62 Microns Thread Diameter, 12″ Width, 12″ Length Alkaline resistant, limited stability to solventsUV resistance – goodHydrolysis resistance – good Precision woven monofilament mesh with uniform yarn sizes and spacing for consistent opening sizes. Nylon exhibits excellent recovery properties and resistance to deformation. Coefficient of friction is low and abrasion resistance is excellent, surpassing that of polyester. It is a tough, flexible and highly elastic fiber that resists most fuels and solvents. List Price: $ 12.21 Price: $…. Click Here to Read More

Nylon Mesh Sheet, White, 1800 Microns Square Opening, 61% Open Area, 500 Microns Thread Diameter, 12″ Width, 12″ Length Alkaline resistant, good resistance to most solventsUV resistance – goodHydrolysis resistance – good Precision woven monofilament mesh with uniform yarn sizes and spacing for consistent opening sizes. Nylon exhibits excellent recovery properties and resistance to deformation. Coefficient of friction is low and abrasion resistance is excellent, surpassing that of polyester. It is a tough, flexible and highly elastic fiber that resists most fuels and solvents. List Price: $ 2.83 Price: $…. Click Here to Read More

Fluorosint 500 PTFE Round Rod, White, 1″ OD, 6″ Length Low Deformation Under LoadLow Coefficient of FrictionExcellent Dimensional StabilityFDA and USDA CompliantChemically Inert Fluorosint 500s unique properties are the result of a proprietary process in which synthetically manufactured mica is chemically linked to PTFE. This bonding results in properties not normally attainable in reinforced PTFE. It has a continuous use temperature to 500 F. When compared to PTFE it has a higher load carrying capability, and lower coefficient of thermal expansion. Fluorosint 500 is a structural/seal grade filled with enough mica to produce a thermal expansion 15percent less than unfilled…. Click Here to Read More

PTFE Sheet, White, 0.375″ Thick, 6″ Width, 12″ Length Sheet FormMax Temp 500 FVery Low Coefficient of FrictionExtremely Low Dielectric ConstantUV and Ozone Resistant PTFE sheet (Polytetrafluoroethylene) sometimes known as Teflon has established itself as a tough, durable polymer, possessing a unique combination of electrical, chemical, mechanical and thermal properties unmatched by any other single substance. Maximum operating temperature -350 degrees to 500 degrees F. This material should not be heated to temperatures above 752 degrees F (400 degrees C). PTFE Sheet is available in a series of nine thicknesses from 0.005 inches to 0.500 inches. In addition, three of these thicknesses…. Click Here to Read More